Yamaha RX-V2500 Manual Do Proprietário

Use this menu to adjust the sound parameters.

 h

 h

 h

■

Use to adjust the output level of the LFE (low-frequency 
effect) channel according to the capacity of your 
subwoofer or headphones. The LFE channel carries low-
frequency special effects which are only added to certain 
scenes. This setting is effective only when this unit 
decodes Dolby Digital or DTS signals.
To access these parameters, select:
Manual Setup > Sound > LFE Level >
Choices: –20 to 

 (dB)

Select to adjust the speaker LFE level.

Select to adjust the headphone LFE level.

y

This menu item is also available in the front panel display system 
options menu (see page 82).

Depending on the settings of LFE Level, some signals may not be 
output from the SUBWOOFER jack.

■

Use to select the amount of dynamic range compression to 
be applied to your speakers and headphones. This setting 
is effective only when the unit is decoding Dolby Digital 
and DTS signals.
To access these parameters, select:
Manual Setup > Sound > Dynamic Range > 
Choices: 

(maximum), STD (standard), 

MIN (minimum)

Select to adjust the speaker compression.

Select to adjust the headphone compression.

• Select “MAX” to preserve the greatest amount of 

dynamic range.

• Select “STD” for general use.
• Select “MIN” for listening to sources at low volume 

levels.

y

This menu item is also available in the front panel display system 
options menu (see page 82).

00_RX-V2500U_EN.book  Page 55  Friday, August 20, 2004  5:20 PM