Yamaha RX-V2500 Manual Do Proprietário

This unit has additional menus that are displayed in the 
front panel display. 

This menu offers additional operations to adjust and 
customize the way this unit operates. Change the settings 
to reflect the needs of your listening environment.

The name of the selected operation appears in the 
front panel display.

This unit enters the standby mode.

y

The new setting is activated next time you turn on the power of 
this unit.

■

Use to set the impedance of this unit so that it matches that 
of your speakers.
Choices: 6

Ω

MIN, 

Ω

• Select “6

Ω

MIN” for speakers that are 6 ohm or higher.

• Select “8

Ω

MIN” for speakers that are 8 ohm or higher.

■

Use to reset all of this unit’s parameters to the initial 
factory settings with the exception of System Memory and 
Auto Setup settings.
Choices: 

, RESET

• Select “CANCEL” if you do not want to reset this 

unit’s parameters.

• Select “RESET” to reset this unit’s parameters.

■

Use to set this unit’s ID for remote control recognition 
(see page 68).
Choices: 

, ID2

• Select “ID1” when the remote control amplifier library 

code is set to “2000” or “2001”.

• Select “ID2” when the remote control amplifier library 

code is set to “2002” or “2003”.

■

Use to set the operation of this unit’s cooling fan.
Choices: 

, CONT

• Select “AUTO” to set the fan to operate automatically 

according to the temperature of this unit.

• Select “CONT” to set the fan to operate continuously 

regardless of the temperature of this unit.

■

Use to set the tuner frequency step according to the 
frequency spacing in your area.
Choices: AM10/FM100, 

• Select “AM10/FM100” for North, Central and South 

America.

• Select “AM9/FM50” for all other areas.

STRAIGHT

EFFECT

STANDBY

/ON

00_RX-V2500U_EN.book  Page 81  Friday, August 20, 2004  5:20 PM