Yamaha RX-V4600 Manual Do Proprietário

You can confirm the results of each analysis.

If you set Setup Type to “Auto”
The results are displayed after all items have been 
analyzed.

• Press n and select Setup to set the measured values.
• Press k and select Retry to retry the auto setup procedure.
• Press h and select Detail to view information about 

measurement results and warning messages. For more 
details about warning messages, see “Troubleshooting for 
the auto setup procedure” on page 31.

• Press l and select Exit to exit from the auto setup 

procedure. If you select Exit, “Don’t Setup?” appears on 
the screen. To set the measured values and exit, select Yes. 
To cancel the settings and exit, select No.

If you set Setup Type to “Step”
The results are displayed individually after each analysis.

• Press n and select Next to start measurement of the next 

menu item.

• Press k and select Retry to retry the auto setup procedure.
• Press h and select Detail to view information about 

measurement results and warning messages. For more 
details about warning messages, see “Troubleshooting for 
the auto setup procedure” on page 31.

• Press l and select Exit to exit from the auto setup 

procedure. If you select Exit, “Don’t Setup?” appears on 
the screen. To set the measured values and exit, select Yes. 
To cancel the settings and exit, select No.

After all menu items have been measured, “Measurement 
Over” appears on the screen and the results for each item 
are displayed.

• Press n and select Setup to set the measured values.
• Press k and select Retry to retry the auto setup procedure.
• Press h and select Detail to view information about 

measurement results and warning messages. For more 
details about warning messages, see “Troubleshooting for 
the auto setup procedure” on page 31.

• Press l and select Exit to exit from the auto setup 

procedure. If you select Exit, “Don’t Setup?” appears on 
the screen. To set the measured values and exit, select Yes. 
To cancel the settings and exit, select No.

y

If you want to make more detailed settings, change the system 
parameters using the Manual Setup menu. If you want to return to 
the Auto Setup settings after making settings in the Manual Setup 
menu, navigate to the Information screen in the Auto Setup menu, 
press k / n repeatedly to select the parameter you want to adjust, 
then press ENTER.

• If you change speakers, speaker positions, or the layout of your 

listening environment, perform auto setup again to re-calibrate 
your system.

• Depending on your listening environment, SubWfr:REV may 

appear in the Wiring results. In this case, SWFR Phase in the 
Manual Setup menu (see page 64) is automatically set to 
Reverse. To select the desired setting, change the SWFR Phase 
parameter in the Manual Setup menu.

• In the Distance results, the distance displayed may be longer 

than the actual distance depending on the characteristics of your 
subwoofer. This may also be the case when using an external 
amplifier.

• In the Equalizing results, different values may be set for the 

same band to provide finer adjustments.