Yamaha RX-V4600 Manual Do Proprietário

■ Remote control operation

Set AMP/SOURCE/TV to AMP, then press one of 
the sound field program buttons repeatedly to 
select the desired program.
The name of the selected program appears in the front 
panel display and video monitor.

y

Choose a sound field program based on your listening preference, 
and not on the name of the program.

• When you select an input source, this unit automatically selects 

the last sound field program used with that source.

• Sound field programs cannot be selected when the 

MULTI CH INPUT is selected.

■ To adjust the tone

You can adjust the bass/treble 
balance for the front left/right and 
center channels.
Press TONE CONTROL 
repeatedly on the front panel to 
select TREBLE or BASS.
Select TREBLE, then rotate 
PROGRAM to the right or left to 
increase or decrease the high-
frequency response.

Select BASS, then rotate PROGRAM to the right or left to 
increase or decrease the low-frequency response.
To cancel the tone control, press TONE CONTROL 
repeatedly to select BYPASS.

• If you increase or decrease the high-frequency or the 

low-frequency sound to an extreme level, the tonal quality of 
the surround speakers may not match that of the front left/right 
and center speakers.

• TONE CONTROL is not effective when THX (page 48) or 

PURE DIRECT (page 38) is selected, or when 
MULTI CH INPUT is selected.

• If headphones are connected to this unit, the Tone Control 

setting adjusts the bass/treble balance of your headphones 
(see page 60).

■ To mute the sound

Press MUTE on the remote control. 
The MUTE indicator flashes on the 
front panel display.
To resume the audio output, press 
MUTE again (or press VOL –/+). 
The MUTE indicator disappears from 
the display.

y

You can adjust the muting level (see page 60).

+10

Hall in Munich

+10