Yamaha RX-V4600 Manual Do Proprietário

■ Automatically presetting FM stations

You can use the automatic preset tuning feature to store 
FM stations. This function enables this unit to 
automatically tune into FM stations with strong signals, 
and to store up to 40 (8 stations in 5 groups, A1 through 
E8) of those stations in order. You can then recall any 
preset station easily by selecting the preset station number.

Press and hold MEMORY (MAN’L/AUTO FM) 
for more than 3 seconds.
The preset number, the MEMORY and AUTO 
indicators flash. After about 5 seconds, automatic 
presetting starts from the frequency currently 
displayed and proceeds toward the higher 
frequencies.

When automatic preset tuning is completed, the front 
panel display shows the frequency of the last preset 
station.

• Any stored station data existing under a preset number is 

cleared when you store a new station under that preset number.

• If the number of the received stations does not reach 40 (E8), 

automatic preset tuning has automatically stopped after 
searching all stations.

• Only FM stations with sufficient signal strength are stored 

automatically by automatic preset tuning. If the station you 
want to store is weak in signal strength, tune into it manually 
and store it by following the procedure in “Manually presetting 
stations”.

Automatic preset tuning options
You can select the preset number from which this unit will 
store FM stations and/or begin tuning toward lower 
frequencies.
After pressing MEMORY in step 3:
1 Press A/B/C/D/E, then PRESET/TUNING l / h to 

select the preset number under which the first station 
will be stored. Automatic preset tuning will stop when 
stations have all been stored up to E8.

2 Press PRESET/TUNING (EDIT) to turn off the colon 

(:) and then press PRESET/TUNING l to begin 
tuning toward lower frequencies.

AUTO

A1:FM 87.5 MHz

Memory back-up
The memory back-up circuit prevents the stored data 
from being lost even if this unit is set in the standby 
mode, the power cable is disconnected from the AC 
outlet, or the power supply is temporarily cut due to 
power failure. However, if the power is cut for more 
than one week, the preset stations may be cleared. 
If so, store the stations again by using the presetting 
station methods.