Yamaha RX-V4600 Manual Do Proprietário

Use the remote control to access and adjust each 
parameter. (Speaker set is used in the following example 
to change parameter settings.)
Manual Setup > Basic > Speaker Set >

Set AMP/SOURCE/TV to AMP, then press 
TOP on the remote control.
The top display appears.

Press k / n repeatedly to select a menu, then 
press h to enter the selected menu.

Press k / n repeatedly to select the 
parameter you want to adjust.

Press ENTER or h, then press k / n 
repeatedly to change the setting of the item 
you want to adjust. 

y

If you want to continue adjusting parameter settings, press 
ENTER to return to the previously selected menu item.

• The available parameters may be displayed on more than one 

page of the GUI display. To scroll through pages, press k / n.

• You cannot change parameter values when Memory Guard is 

set to “On”. If you want to change the parameter values, set 
Memory Guard to “Off” (see page 68).

Memory back-up
The memory back-up circuit prevents the stored data 
from being lost even if this unit is set in the standby 
mode, the power cable is disconnected from the AC 
outlet, or the power supply is temporarily cut due to 
power failure. However, if the power is cut for more 
than one week, the parameter values will return to the 
factory settings. If this happens, edit the parameter 
value again.