Yamaha RX-V4600 Manual Do Proprietário

PR/SB Select (Presence/surround back speaker 
selection)
Surround back and presence speakers do not output sound 
simultaneously. You can select to prioritize either speaker 
set when playing sources that contain surround back 
channel signals using CINEMA DSP sound field 
programs.
Choices: Presence, Surround Back 

• Select “Presence” to use presence speakers even when 

surround back channel signals are input. The signals 
for the surround back channel will be output from 
surround speakers.

• Select “Surround Back” to use surround back speakers 

when a surround back channel signal is detected in a 
CINEMA DSP program. Presence channel signals will 
be output from front speakers.

Use this menu to set up basic system parameters.

Select Manual Setup, then press h.

Select Basic, then press h.

Select the desired parameters, then press h 
to access and adjust.

y

• Most of the parameters described in the basic menu are set 

automatically when you run auto setup. You can use the basic 
menu to make further adjustments, but we recommend running 
auto setup first.

• You can reset these parameters by performing the auto setup 

procedure (see page 27).