Yamaha RX-V4600 Manual Do Proprietário

This unit has additional menus that are displayed in the 
front panel display.

This menu offers additional operations to adjust and 
customize the way this unit operates. Change the initial 
settings (indicated in bold under each parameter) to reflect 
the needs of your listening environment.

Rotate PROGRAM to select the desired menu 
item.
The name of the selected item appears in the front 
panel display.

Press STANDBY/ON to save the new setting
This unit enters the standby mode.

y

The new setting is activated next time you turn on the power of 
this unit.

The remote controls and VOLUME control on the front panel of 
this unit are ineffective while you are using the advanced setup 
menu.

■ SP IMP.  (Speaker impedance)

Use to set the impedance of this unit so that it matches that 
of your speakers.
Choices: 6

ΩMIN, 8ΩMIN

• Select “6

ΩMIN” for speakers 6 ohms or higher.

• Select “8

ΩMIN” for speakers 8 ohms or higher.

■ PRESET  (User preset)

Use to reset all of this unit’s parameters to the initial 
factory settings with the exception of System Memory and 
Auto Setup settings.
Choices: CANCEL, RESET
• Select “CANCEL” if you do not want to reset this 

unit’s parameters.

• Select “RESET” to reset this unit’s parameters.

This setting does not affect advanced setup menu item 
parameters.

■ REMOTE AMP  (Remote control AMP ID)

Use to set this unit’s ID for remote control recognition 
(see page 72).
Choices: ID1, ID2
• Select “ID1” when the remote control amplifier library 

code is set to “2000” or “2001”.

• Select “ID2” when the remote control amplifier library 

code is set to “2002” or “2003”.

■ REMOTE TUN  (Remote control tuner ID)

Use to set this unit’s tuner ID for remote control 
recognition (see page 72).
Choices: ID1, ID2
• Select “ID1” when the remote control tuner library 

code is set to “2602”.

• Select “ID2” when the remote control tuner library 

code is set to “2603”.

■ FAN MODE  (Fan operation mode)

Use to set the operation of this unit’s cooling fan.
Choices: AUTO, CONT.
• Select “AUTO” to set the fan to operate automatically 

according to the temperature of this unit.

• Select “CONT.” to set the fan to operate continuously 

regardless of the temperature of this unit.

 < Asia and General models only >
■ TU  (Tuner frequency step)

Use to set the tuner frequency step according to the 
frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
• Select “AM10/FM100” for North, Central and South 

America.

• Select “AM9/FM50” for all other areas.
■ LANG.  (GUI language)

Use to set the language that appears in this unit’s GUI 
(graphical user interface) display.
Choices: ENGLISH, JAPANESE, FRENCH, GERMAN
You can select the language of your choice.

STANDBY

/ON