Yamaha RX-Z9 Guia Do Utilizador

Choices: Large, 

, None

• Select Large if you have large surround left and right 

speakers or if a rear subwoofer is connected to the 
surround speakers. The entire range of the surround 
channel signal is directed to the surround left and right 
speakers.

• Select Small if you have sm all surround left and right 

speakers. The low-frequency signals of the surround 
channel are directed to the speakers selected with 
“Bass Out”.

• Select None if you do not have surround speakers. This 

sets the unit to the Virtual CINEMA DSP mode (see 
page 44) and automatically sets the surround back 
speaker setting (Surround Back) to None.

Choices: Large x1, Small x1, 

, 

Large x2, None

• Select Large x1 if you have a large surround back 

speaker. The unit directs the entire range of the 
surround back channel signal to the surround back left 
speaker.

• Select Small x1 if you have a small surround back 

speaker. The low-frequency signals of the surround 
back channel are directed to the speakers selected with 
“Bass Out”, and the rest of the frequency signals are 
directed to the surround back left speaker.

• Select Small x2 if you have two small surround back 

speakers. The low-frequency signals of the surround 
back channels are directed to the speakers selected with 
“Bass Out”.

• Select Large x2 if you have two large surround back 

speakers. The unit directs the entire range of the 
surround back channel signal to the surround back 
speakers.

• Select None if you do not have a surround back 

speaker. The unit directs all of the surround back 
channel signal to the surround left and right speakers.

If you select Large x1 or Small x1, connect a speaker to the 
SURROUND BACK (SINGLE) speaker terminals.

00EN.00_RXZ9_U.book  Page 75  Friday, October 17, 2003  11:40 AM