Yamaha CLP-153SG Guia Do Utilizador

The initial voice (including dual mode), damper pedal, soft pedal, and

tempo settings made in step 2 of the recording procedure are actually re-
corded by the CLP-153SG. These initial settings can be changed after the
recording is finished by pressing the [REC] button to engage the record
ready mode, making the required changes, and then pressing the [REC]
button again to exit from the record ready mode and register the changes. If
you do this, be careful not to press the [PLAY] button or a key on the key-
board, either of which will start recording and erase all previous recorded
data.

●

The recorded data can be erased by first pressing the [REC] button to

engage the record ready mode, and then pressing the [PLAY] button twice
without recording any data.

●

To play back what you’ve recorded, simply press the RECORDER

[PLAY] button. Playback starts from the beginning of the recorded data,
and will stop automatically at the end of the recorded data. You can also
stop playback at any time by pressing the [PLAY] button.

• It is possible to play along on the keyboard during playback.
• The playback volume and tempo can be adjusted by using the [MASTER

VOLUME] and [TEMPO] controls, respectively.

• If the metronome is being used during playback, the metronome will stop

when playback is stopped.

• The playback data is not transmitted via the MIDI OUT connector.

• All recorder data will be retained in memory for about one week after the

power is turned off. If you want to keep your recorded data for longer
periods, turn the power on briefly at least once a week. It is also possible
to store it to an external MIDI storage device such as the Yamaha DOU-
10 Disk Orchestra Unit by using the Bulk Dump function described on
page 18.

When you want to locate a specific point in a recording you can quickly

move forward through the recording while monitoring the sound by press-
ing the [REC] button while holding the [MIDI/TRANSPOSE] button.

●