Yamaha CLP-955 Guia Do Utilizador

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

CLP-955

The [FUNCTION] button provides access to a range of functions that give the

Clavinova extraordinary versatility. The functions are categorized in groups as
follows:

Tuning ...................................................................... 28

Scale ......................................................................... 28

Dual Mode Functions .............................................. 29

Split Mode Functions .............................................. 30

Pedal Functions ...................................................... 32

Metronome Volume ................................................. 32

Preset Song Part Cancel Volume ........................... 32

MIDI Functions ........................................................ 33

Backup Functions ................................................... 36

Z

Press the [FUNCTION] button so that its indicator lights.

• Functions cannot be selected during demo/preset song playback or when

the user song recorder is in operation.

X

Use the FUNCTION [<] and [>] buttons to select the desired
function: F1 through F9.

C

In the case of the Scale (F2), Dual Mode (F3), Split Mode (F4),
Pedal Functions (F5), MIDI (F8), and Backup (F9) functions, you
will have to press the [+/YES] button once to enter the respective
sub-mode after the function has been selected, and then use the
FUNCTION [<] and [>] buttons again to select the desired sub-
function.

• The Dual or Split mode must be engaged before the F3 and F4 functions

can be selected, respectively. If the corresponding mode is not engaged,
“

F3.-

” or “

F4.-

” will appear on the display and the corresponding sub-

mode will not be available.

• The Dual mode can be engaged while in the Function mode, but the

Function mode must be exited before the Split mode can be engaged.

V

Set the function as required by using the [–/NO] and [+/YES]
buttons (see the individual function descriptions, below).

• After selecting the function, the current setting will be displayed when the

[–/NO] or [+/YES] button is pressed for the first time.

B

Press the [FUNCTION] button so that its indicator goes out to exit
from the function mode.

●

Press [+/YES]

Use FUNCTION
[

<

], [

>

]

Use [–/NO], [+/YES]

Press [–/NO] or [+/YES]
once

FUNC-

TION

TEMPO

FUNCTION