Yamaha CLP-955 Guia Do Utilizador

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

CLP-955

The volume of the metronome sound can be changed. After selecting “F6”, use the [–/NO]

and [+/YES] buttons to set the metronome volume as required. The volume range is from 1
through 20. A setting of “1” produces minimum sound, while a setting of “20” produces
maximum metronome volume. Press the [–/NO] and [+/YES] buttons simultaneously to recall
the default setting “10”.

After selecting “F5.Y”, press the [+/YES] button to engage the pedal functions sub-mode,

then use the FUNCTION [<] and [>] buttons to select the desired pedal functions, as listed
below.

This function sets the volume at which a “canceled” part is played during preset song

playback (see page 15 for information on the “part-cancel” function). Use the [–/NO] and [+/
YES] buttons to set the volume as required. The volume range is from 0 through 20. A setting
of “0” produces no sound, while a setting of “20” produces maximum volume. Press the [–/
NO] and [+/YES] buttons simultaneously to recall the default setting “5”.

Adjust the part volume to a comfortable level to use the “canceled” part as a guide to play

along with. Set to “0” if you don’t want to hear the part.

■

 SHORTCUT: You can jump directly to the metronome functions by pressing the [FUNC-

TION] button while holding the METRONOME [START/STOP] button.

This function conveniently lets you set the left pedal for normal soft pedal operation, or for
song start/stop operation. Use the [–/NO] and [+/YES] buttons to select the desired left-
pedal mode. Press the [–/NO] and [+/YES] buttons simultaneously to recall the default
setting “1”.

1: Soft

The left pedal functions as the soft pedal.

2: Start/Stop

The left pedal functions in the same manner as the SONG [START/STOP] button.

The GRAND PIANO 1 voice features special “Sustain Samples” which recreate the unique
resonance of an acoustic grand piano’s soundboard and strings when the damper pedal is
pressed. This function lets you adjust the depth of this effect. Use the [–/NO] and [+/YES]
buttons to set the effect depth as required. The effect depth range is from 0 through 20. A setting
of “0” produces no effect, while a setting of “20” produces maximum effect depth. Press the [–/
NO] and [+/YES] buttons simultaneously to recall the default setting “12”.