Yamaha CVP-204 Manual Do Proprietário

The explanations here apply to step #3 of the procedure on page 128.

You can save your custom panel settings to the Registration Memory presets, and call them up by pressing the 
appropriate REGISTRATION MEMORY buttons [1] - [8]. The convenient Registration Sequence function lets you call up 
the presets in any order you specify, by simply using the [BACK]/[NEXT] buttons or the pedal as you play.

This lets you specify the settings you want to be maintained or left unchanged, even when changing Registration 
Memory presets. For details, see page 90.

Turns the Registration 
Sequence function 
on/off. When this is 
set to “ON,” the 
programmed 
Registration 
Sequence is shown at 
the top right of the 
Main display, and you 
can step through the 
sequence in this 
display by using the 
[BACK]/[NEXT] 
buttons or the pedals.

Determines which pedal is used to advance 
(increment) through the sequence.

Determines which 
pedal is used to 
reverse (decrement) 
through the sequence.

Determines how Registration 
Sequence behaves when 
reaching the end of the 
sequence.
Stop
Pressing the [NEXT] button or 
the “advance” pedal has no 
effect. The sequence is 
“stopped.”
Top
The sequence starts again at 
the beginning.
Next Bank
The sequence automatically 
moves to the beginning of the 
next Registration Memory bank 
in the same folder.

Indicates the file name of the selected 
Registration Memory bank.

Indicates the Registration Memory preset 
numbers, in the order of the current 
Registration Sequence.

These move the cursor position in the sequence.

Replaces the number at the cursor position with the 
currently selected Registration Memory number.

Inserts the number of the currently 
selected Registration Memory preset 
immediately before the cursor position.

Deletes the number at the 
cursor position.

Deletes all Registration 
Memory numbers in the 
sequence.

When you are using the 
pedal to call up specified 
presets, you can easily reset 
the Registration Sequence 
and go back to the first entry 
by holding down the pedal 
for a few seconds (the box 
indicator at the top right of 
the MAIN display goes out).  
Press and release the foot 
pedal to re-select the first 
entry in the sequence.

n

Setting Registration 
Sequence Enable to “ON” 
overrides any other Pedal 
settings (for pedals assigned 
to “Regist (+) Pedal” and 
“Regist (-) Pedal” here). 
These include the pedal set-
tings on page 134, and in 
Voice Set on page 138.

n

When both “Regist (+) 
Pedal” and “Regist (-) Pedal” 
are set to “OFF,” the pedals 
cannot be used to step 
through the Registration 
Sequence; only the [BACK]/
[NEXT] buttons can be used 
in the MAIN display.

n

When both “Regist (+) 
Pedal” and “Regist (-) Pedal” 
are set to the same pedal, 
“Regist (+) Pedal” takes 
priority.

Registration Sequence data is included as part 
of the Registration Memory bank file. To save 
your newly programmed Registration Sequence, 
store the current Registration Memory bank file 
(page 40, 48). Any Registration Sequence data 
is lost when changing Registration Memory 
banks, unless you’ve stored it with the Registra-
tion Memory bank file.