Yamaha CVP-203 Manual Do Proprietário

Página de 170
17
CVP-205/203
Connect the power cord.
1
Insert the plugs at the ends of the cord, one into the 
AC INLET on the Clavinova, and the other into a 
standard AC outlet.
In some areas, a plug adapter may be provided to 
match the pin configuration of the AC wall outlets in 
your area.
(The shape of plug differs depending on locale.)
2
Press the [POWER] switch.
The main display appears in the LCD display. The 
drive lamp below the lower right end of the 
keyboard also lights.
When you’re ready to turn off the power, press the 
[POWER] switch again. 
Both the display and the drive lamp below the 
right end of the keyboard will turn off.
Adjusting the display contrast
If the LCD is difficult to read, adjust the contrast with the 
[LCD CONTRAST] knob at the right of the LCD.
Setting the volume
Use the [MASTER VOLUME] dial to adjust the volume to 
an appropriate level.
CAUTION
Do not use the Clavinova at a high volume level for a long period of 
time, or your hearing may be damaged.
Connect a pair of headphones to one of the [PHONES] 
jacks.
Two [PHONES] jacks are provided.
Two sets of standard stereo headphones can be plugged 
in. (If you are using only one pair of headphones, you 
can plug them into either of these jacks.)
Turning the Power On 
and Off
CVP-205
CVP-203
The drive lamp lights.
A
B
C
D
E
BALANCE
PART
CHANNEL
ON / OFF
F
G
H
I
J
POWER
ON
OFF
LCD
CONTRAST
MIN
MAX
MASTER VOLUME
FADE IN / OUT
Using headphones
CVP-205
CVP-203
PHONES
MIN
MAX
INPUT
MIC.
MIC. LINE
PHONES
VOLUME
LINE IN