Yamaha CVP-203 Manual Do Proprietário

With this feature, you can have the notation automatically shown on the display as the song plays. This can be used 
with your own recordings as well as the internal Demo songs.

Enables/disables display of the left-hand key range. 
Depending on other settings, this parameter may be 
unavailable and may appear grayed out. If this is the 
case, go to the detailed setting display (shown 
below; use the [8

▲▼] buttons) and set the LEFT 

CH. parameter to any channel except “AUTO.” Or, 
go to the SONG SETTING display in the Function 
menu (page 129) and set the TRACK 2 parameter 
to any channel except “OFF.”

Enables/disables display of the right-hand key range.
Channel 1 is automatically selected when 
[TRACK1] is set to [OFF] from the SONG SETTING 
display (page 129).

Enables/disables display of the chords. 
If the selected song does not contain chord data, chords 
are not displayed.

Enables/disables display of the note name (pitch).

Determines the display resolution (or zoom level) of the notation.
SMALL ..... Notation is shown in small size.
LARGE ..... Notation is shown in large size.

The displayed notation is 
generated by the Clavinova 
based on the song data. As 
a result, it may not be 
exactly the same as com-
mercially available sheet 
music of the same song — 
especially when displaying 
notation of complicated pas-
sages or many short notes.

n

Some song data for the 
Clavinova has been 
recorded with special “free 
tempo” settings. For such 
song data, the tempo, beat, 
measure and music nota-
tion will not be displayed 
correctly. 

n

[RIGHT] and [LEFT] cannot 
be turned off at the same 
time.

n

The note name is indicated 
at the left of the note. When 
the space between the 
notes is too small, the indi-
cation may be moved to the 
top left of the note.

n

You can increase the num-
ber of measures that will be 
displayed by decreasing the 
other items to be displayed 
(parts, lyrics, chords, etc.).

n

When accidentals (sharp 
and flats) and notes cannot 
be displayed on one line, 
they are displayed in the 
next line from the middle of 
the measure.

n

The notation functions can-
not be used to create song 
data by inputting notes. For 
information on creating 
song data, see page 97.

If the MAIN screen (at left) 
is not displayed, press the 
[DIRECT ACCESS] button 
followed by the [EXIT] but-
ton.

This calls up the detailed setting display for notation. 
For details, see the next page.

Enables/disables display of the lyrics. 
If the selected song does not contain lyric data, lyrics are 
not displayed.