Yamaha CVP-203 Manual Do Proprietário

The explanations here apply to step #3 on page 88.

The explanations here apply to step #3 on page 88.

The explanations here apply to step #3 on page 88.

These controls are used to adjust the 
brilliance of the tone. This setting 
affects all Natural voices globally. When 
other than piano voice (Natural) is 
selected, set this on EFFECT page. 
For details, see the EFFECT page 
(page 92).

Determines the tuning curve, especially 
for piano voices. Select “FLAT” if you 
feel the tuning curve of the piano voice 
does not quite match that of other 
instruments voices.

STRETCH .. Tuning curve particularly 

for pianos

FLAT .......... Tuning curve in which the 

frequency is octave 
doubled over the entire 
keyboard range

Determines the depth of 
sustain sampling for the 
damper pedal.

The available parameters 
differ depending on the 
selected voice.

Set the volume of the current edited 
voice.

Set the portamento time of each 
part (MAIN/LAYER/VOICE) 
(Regular Voice only) (page 121).

Determines the touch sensitivity, or 
how greatly the volume responds to 
your playing strength.
0 —–– Produces more dramatic 

level drops, the more softly 
you play.

64 

—– Normal response.

127 — Produces high volume for 

any playing strength (fixed)

Shift the octave range of the 
selected voice up or down in 
octaves. When the Main or Layer 
part’s voice is used, the M/LYR 
parameter is available; when the 
Left part’s voice is used, the LEFT 
parameter is available.

The parameters are the same 
as for CONTROLLER display. 
For details, see page 131.

This determines whether the voice 
is played monophonically (Regular 
Voice only) (page 59).

Determines the filter, EG, and 
vibrato settings (see below).