Yamaha MM6 Guia Do Utilizador
Storing/Saving Data
68
MM6/MM8 Owner’s Manual
A new USB storage device must be formatted before it can be used by this instrument.
1
After connecting the USB storage
device to be formatted to the instru-
ment’s USB TO DEVICE terminal, check
that “CONNECT” is showing in the
MAIN display.
device to be formatted to the instru-
ment’s USB TO DEVICE terminal, check
that “CONNECT” is showing in the
MAIN display.
2
Press the [MENU] button.
A message will appear asking you to confirm
the format operation.
the format operation.
3
Press [EXECUTE] button and a confir-
mation message will appear.
mation message will appear.
You can press the [DEC/NO] button at this
point to cancel the operation.
point to cancel the operation.
4
Press the [EXECUTE] button again, or
the [INC/YES] button, and the format
operation will begin.
the [INC/YES] button, and the format
operation will begin.
5
A message will appear on the display
when the operation is complete.
when the operation is complete.
Press the [EXIT] button to return to the MAIN
display.
display.
Formatting a USB storage device
• If you format a USB storage device that already contains data, all
of the data will be erased. Be careful not to erase important data
when using the format function.
when using the format function.
CAUTION
• If the Load item appears in step 2, press the CATEGORY [INC] /
[DEC] buttons as many times as necessary until the Format item
appears.
appears.
NOTE
• Once the format-in-progress message appears on the display
the format operation cannot be canceled. Never turn off the
power or remove the USB storage device during this operation.
power or remove the USB storage device during this operation.
CAUTION
• If the USB storage device has been write-protected, an appropriate
message will appear on the display and you will not be able to exe-
cute the operation.
cute the operation.
NOTE