Yamaha PSR- 273 Guia Do Utilizador
MIDI Functions
57
This function lets you enable or disable keyboard control over the PSR-275/273’s
voices in the Function mode (page 60). This would come in handy, for example,
when recording notes to MIDI sequencer. If you are using the sequencer to play
back the voices of the PSR-275/273, you would want to set this to “off” — in
order to avoid getting “double” notes, both from the keyboard and from the
sequencer. Normally, when playing the PSR-275/273 by itself, this should be set
to “on.”
voices in the Function mode (page 60). This would come in handy, for example,
when recording notes to MIDI sequencer. If you are using the sequencer to play
back the voices of the PSR-275/273, you would want to set this to “off” — in
order to avoid getting “double” notes, both from the keyboard and from the
sequencer. Normally, when playing the PSR-275/273 by itself, this should be set
to “on.”
The most common use for the Initial Setup Send function is in recording a song
on a sequencer that is intended for playback with the PSR-275/273. Essentially,
this takes a “snapshot” of the PSR-275/273 settings and sends that data to the
sequencer. By recording this “snapshot” at the start of the song (before any actual
performance data), you can instantly restore the necessary settings on the PSR-
275/273 in the Function mode (page 60). Provided there is a pause in the song,
you could also do this in the middle of a song — for example, completely chang-
ing the PSR-275/273 settings for the next section of the song.
on a sequencer that is intended for playback with the PSR-275/273. Essentially,
this takes a “snapshot” of the PSR-275/273 settings and sends that data to the
sequencer. By recording this “snapshot” at the start of the song (before any actual
performance data), you can instantly restore the necessary settings on the PSR-
275/273 in the Function mode (page 60). Provided there is a pause in the song,
you could also do this in the middle of a song — for example, completely chang-
ing the PSR-275/273 settings for the next section of the song.
This determines whether the style and song playback functions are controlled by
the PortaTone’s internal clock (off) or by MIDI clock data from an external
sequencer or computer (on).
This should be set to on when you want to have style or song playback follow the
external device (such as a rhythm machine or a sequencer). The default setting is
off.
the PortaTone’s internal clock (off) or by MIDI clock data from an external
sequencer or computer (on).
This should be set to on when you want to have style or song playback follow the
external device (such as a rhythm machine or a sequencer). The default setting is
off.
These settings can be made in the Function mode (page 60).
Local Control
• No sound is output from the
PSR-275/273 when Local ON/
OFF is set to OFF.
OFF is set to OFF.
Using Initial Setup Send with a Sequencer
• When the Initial Setup Send
operation is completed, the PSR-
275/273 automatically returns to
the previous panel condition.
275/273 automatically returns to
the previous panel condition.
External Clock
• If External Clock is set to ON,
style or song playback will not
start unless external clock are
received.
start unless external clock are
received.
MIDI LSB Receive Cancel
Determines whether the LSB data of Bank Select is received or
not. Press and hold the lowest key and turn on the power to change
the setting (LSB is ignored).
not. Press and hold the lowest key and turn on the power to change
the setting (LSB is ignored).
To restore MIDI LSB Receive Cancel to normal (LSB is recog-
nized), turn on the power again normally.
nized), turn on the power again normally.