Yamaha YDP-113 Manual Do Proprietário

Página de 44
YDP-113
   MIDI Functions
ENGLISH
26
MIDI Functions
You can make detailed adjustments to MIDI settings.
For more information about MIDI, see the “About MIDI” section (page 23).
MIDI Transmit/Receive Channel Selection
In any MIDI control setup, the MIDI channels of the transmitting and receiving equip-
ment must be matched for proper data transfer.
This parameter enables you to specify the channel on which the YDP-113 transmits or 
receives MIDI data. 
Setting the transmit channel
While holding down the A-1 and C
0 keys, press one of the C1–E2 keys.
Setting the receive channel
While holding down the A-1 and C
0 keys, press one of the C4–F5 keys.
Local Control ON/OFF
“Local Control” refers to the fact that, normally, the YDP-113 keyboard controls its 
internal tone generator, allowing the internal voices to be played directly from the key-
board. This situation is “Local Control On,” since the internal tone generator is con-
trolled locally by its own keyboard.
Local control can be turned OFF, however, so that the YDP-113 keyboard does not play 
the internal voices, but the appropriate MIDI information is still transmitted via the 
MIDI OUT connector when notes are played on the keyboard. At the same time, the 
internal tone generator responds to MIDI information received via the MIDI IN con-
nector.
While holding down the A-1 and C
0 keys, press the C6 key.
NOTE
Demo and preset song data are 
not transmitted via MIDI.
NOTE
In Dual mode, Voice 1 data is 
transmitted on its specified 
channel and Voice 2 data is 
transmitted on the next greater 
channel number relative to the 
specified channel. In this mode, 
no data is transmitted if the 
transmit channel is set to “OFF.”
TIP
ALL:
A “Multi-timbre” Receive mode 
is available. It allows simulta-
neous reception of different 
parts on all 16 MIDI channels, 
enabling the YDP-113 to play 
multi-channel song data 
received from a music computer 
or sequencer.
1+2:
A “1+2” Receive mode is avail-
able. It allows simultaneous 
reception on channels 1 and 2 
only, enabling the YDP-113 to 
play 1 and 2 channel song data 
received from a music computer 
or sequencer.
TIP
Program change and other like 
channel messages received will 
not affect the YDP-113’s panel 
settings or the notes you play 
on the keyboard.
NOTE
The YDP-113 does not receive 
MIDI data when it is in Demo or 
Preset Song mode.
Procedure
Procedure
A-1
C1
C4
F5
E2
OFF
C 0
D 2
E5
1 3 5 6 8 10
2 4
7 9 11
14 16
12 13 15
For ALL mode
1 3 5 6 8 10
2 4
7 9 11
14 16
12 13 15 1+2
For setting the 
transmit channels. 
(C1–D 2)
For setting the 
receive channels. 
(C4–F5)
A-1 C 0
C6
The highest 
key