Yamaha s112ivn Manual Do Proprietário

– 4 –

The illustration below shows audio connections for a standard setup using two speaker systems.

MIXING

CONSOLE

GRAPHIC

EQUALIZER

SPEAKER
SYSTEMS

L

R

L

R

SPEAKER
SYSTEMS

DAISY-CHAINED

POWER

AMPLIFIER

L

R

Since the speaker systems in this series are equipped with two input terminals that are internally connected in parallel, it is

possible “daisy-chain” speakers by connecting the output from the power amplifier to one Neutrik connector, and a second

speaker system to the other.

We do not recommend connecting more than two 8  speakers in parallel. Two parallel-connected 8  speakers have a total

impedance of 4 , which is the minimum that should be connected to one amplifier output channel. The  S112IVN, S115IVN,

SM10IVN, SM12IVN, SM15IVN and SW118IVN are 8  speakers, and two of these can safely be paralleled on one output. The

S215IVN and SW215IVN, however, have an impedance of 4  and should not be parallel-connected with another  S215IVN /

SW215IVN or any other model.

If you will be using the Neutrik connectors for speaker input, wire the plugs as shown below. Be sure to use proper speaker

cable—NOT shielded instrument or line cable—for all speaker connections.

2– (NO USE)

2+ (NO USE)

1+ : HOT(+)

1– :COLD (–)

Neutrik NL4FC connector

Caution: Use only unshielded speaker cable with stranded conductors to connect speakers to the speaker terminals on a power

amplifier. The use of audio cable not rated as sufficient for the amplifier’s maximum output level can create a potential fire

hazard.