Kenwood DDX7015 Manual De Instruções

Control screen

Sound Effects screen

Audio

You can display the same Sound Effects Menu on
the Control screen of any source.

1 Calls the Sound Effects Menu.

2 Calls the Setup Menu. (see page 57)

3 Returns to the Control screen of the previous

source.

• Your setup on the <Sound Effects Menu> is

adjusted automatically according to your <Audio
Set Up> (see page 58) on the Setup menu. We
recommend you to complete the <Audio Set Up>
first, then set up the <Sound Effects Menu>.

• Displayed items vary depending on the optional

accessory connected.

Audio Control 1 screen

Audio Control 2 screen

1 Returns to the Control screen of the previous

source.

2 Calls the Setup Menu. (see page 57)

3 Calls the Sound Effects Menu.

4 Adjusts the right and left volume balance.

5 Adjusts the front and rear volume balance.

6 Adjusts the volume of the present source based on

the difference level of original volume.

If you have increased the volume first, then
reduced it using the "Vol. Offset", the big sound
may suddenly be generated when you switch to
another source.

7 Adjusts the subwoofer volume. (with the optional

accessory DSP unit connected only)

8 Turns the Loudess contol function On or Off. (Does

not appear when the optional accessory DSP unit is
connected.)
If turned "On", high and low tones are automatically
enhanced during low volume. (

On)

9 Displays the Audio Control 2 screen.

p Adjusts the bass boost of the B.M.S power

amplifier (optional accessory).

You may not set some models of power amp boost
to "+18". See the catalog or instruction manual of
power amplifier.

q Set the center frequency of bass boost you have set

for the "Amp Bass".
If you set it to "Low", the center frequency is
dropped for 20 to 30%.

w Displays the Audio Control 1 screen.

Set Up

Audio

 Direct

 SRC

Set Up

SRC

Audio

Set Up

SRC

Audio

Set Up

SRC

Audio