Kenwood KVT-M707 Manual De Instruções

English

   

|

   

1.  Use two "R03"/ "AAA"-size batteries.

Slide the cover while pressing downwards to 
remove it as illustrated.

2.  Insert the batteries with the + and – poles aligned 

properly, following the illustration inside the case.

2WARNING

•  Store unused batteries out of the reach of children. 

Contact a doctor immediately if the battery is accidentally 
swallowed.

•  Do not set the remote control on hot places such as above 

the dashboard.

•  The provided batteries are intended for use in operation 

checking, and their service life may be short.

•  When the remote controllable distance becomes short, 

replace both of the batteries with new ones.

When the operator panel and monitor panels are 
dirty, wipe and clean them using a soft cloth (such as 
a commercially available silicon coated cloth). When 
contaminated excessively, clean them using a cloth 
dipped in a neutral detergent first, then remove the 
detergent using a dry cloth.
Do not use a hard cloth and a volatile chemical (such 
as an alcohol). If used, the panel surface may be 
scratched or printed letters may be erased.

If the terminals on the unit or faceplate get dirty, wipe 
them with a clean soft dry cloth.

Indicates the key operation on the receiver.

 Indicates the button you must touch.

 Indicates the key or joystick operation on the 
remote controller.

The initial value of each setup is shown.

Gives an additional information or an operation 
advice.

KVT-M707_Instruct_K_r6.indd   5

KVT-M707_Instruct_K_r6.indd   5

05.5.9   1:27:23 PM

05.5.9   1:27:23 PM