Korg MICRO Manual Do Utilizador

Here’s how to initialize the settings of the currently selected program.

In Full Edit mode, turn knob [1] to select “INIT.PROG.”

Turn knob [2] to make the display indicate “SURE Y/N.”

Here you can select either “YES” or “NO.”

To initialize, select “YES” and press the [WRITE] button.

The program will be initialized, and the display will indicate “COMPLETE.”

If you decide not to initialize, press the [EXIT/SHIFT] button.

Here’s how to copy timbre settings from another program to the timbre of 
the currently selected program.

In Full Edit mode, turn knob [1] to select “COPY.TMBR.”

Turn knob [2]; the left side of the display will show the copy-
source program number, the middle will show the copy-
source timbre, and the right will show the copy-destination 
timbre.

Use knob [2] to move the cursor below the program number, 
and then use knob [3] to select the copy-source program.

Use knob [2] to move the cursor below the timbre, and then 
use knob [3] to select the copy-source timbre.

Use the [TIMBRE SELECT] lever to select the copy-destina-
tion timbre.

To execute the copy, press the [WRITE] button.

The copy will be executed, and the display will indicate “COMPLETE.”

If “VOIC.MODE” is “SINGLE,” you can’t select “TIMBRE2” as the copy-
destination.

If you decide not to execute the copy, press the [EXIT/SHIFT] button.

Program data and global data can be transmitted from the microKORG XL 
as MIDI exclusive data. The action of transmitting MIDI exclusive data to an 
external MIDI device is called a “data dump.”
By performing a data dump you can store various types of data on an exter-
nal MIDI device, or change the sounds or settings of another microKORG 
XL unit.

If the microKORG XL receives a dump request from an external device, 
it will execute a data dump according to the type of request that it re-
ceived.

If you want data dumps to be received, turn the GLOBAL page “PRO-
TECT” parameter off, and set the MIDI FLT page “SYS EX” parameter to 
ENABLE. If this is set to DISABLE, data dumps cannot be received.

The “MIDI Implementation” including details on the MIDI exclusive format 
can be downloaded from the Korg website.

Do not touch the microKORG XL’s knobs or keyboard while data is 
being transmitted or received. Never turn off the power during this 
time.

Some MIDI interface devices may be unable to transmit or receive 
the microKORG XL’s MIDI exclusive messages.