Korg m50-73 Guia Do Utilizador
Appendices
102
Included CD-ROM
Can’t install the driver
Is the USB cable connected correctly?
Is the CD-ROM inserted in your CD drive?
• Make sure that the CD-ROM is inserted correctly.
Is the lens of your CD drive dirty?
• Use a commercially-available lens cleaner to clean
the lens.
Are you able to use USB?
• If you are using Windows XP, go to [Control Panel]
→ [System], and select the [Hardware] tab. In
[Device Manager], check the settings for Universal
Serial Bus Controller and USB Root Hub.
[Device Manager], check the settings for Universal
Serial Bus Controller and USB Root Hub.
Has the M50 been detected as an unknown device?
• If you are using Windows XP, go to [Control Panel]
→ [System], select the [Hardware] tab, and check
[Device Manager]. If the M50 has not been detected
correctly, it will be displayed in “Other devices” or
“Unknown devices.” Reconnect the USB cable; if
the M50 is again displayed as an “Unknown
device,” the computer has failed to detect it
correctly. Delete the “Unknown device” entry, and
reinstall the driver.
[Device Manager]. If the M50 has not been detected
correctly, it will be displayed in “Other devices” or
“Unknown devices.” Reconnect the USB cable; if
the M50 is again displayed as an “Unknown
device,” the computer has failed to detect it
correctly. Delete the “Unknown device” entry, and
reinstall the driver.
Your software does not respond to the M50
Is the USB cable connected correctly?
Did you install the driver?
Has your computer detected the connected M50?
• If you are using Windows XP, go to Control Panel
→ “Sounds and Audio Devices Properties” and
click the Hardware tab.
click the Hardware tab.
If you are using Mac OS X, go to Macintosh HD
→
Application folder
→ Utility folder → “Audio MIDI
Settings,” select the “MIDI Devices” tab, and check
that the M50 has been detected.
that the M50 has been detected.
Some computer hardware configurations may not
recognize the M50.
recognize the M50.
Check the M50’s assignments and USB-MIDI port
settings.
settings.
The connected device or software may not support the
messages you are transmitting. Refer to the manual of
the connected device or software to verify that it
responds to the messages you are transmitting.
messages you are transmitting. Refer to the manual of
the connected device or software to verify that it
responds to the messages you are transmitting.
If you want to transmit and receive system exclusive
data, the MIDI Filter Enable Exclusive dialog box must
be selected (Global P1: MIDI– MIDI Routing page).
This setting must be selected if you’ve connected the
M50 to your computer and want to edit the M50 from
your computer (or to edit bi-directionally). Select this if
you’re using the M50 Editor/Plug-In Editor. The MIDI
Filter Exclusive setting is selected by default.
data, the MIDI Filter Enable Exclusive dialog box must
be selected (Global P1: MIDI– MIDI Routing page).
This setting must be selected if you’ve connected the
M50 to your computer and want to edit the M50 from
your computer (or to edit bi-directionally). Select this if
you’re using the M50 Editor/Plug-In Editor. The MIDI
Filter Exclusive setting is selected by default.
Note:
The multisample and preset pattern list have
been updated in version 1.0.1 of M50 Editor/Plug-In
Editor. In order to maintain compatibility of the
display in the edit window, please download and use
the most recent version of the editor.
Editor. In order to maintain compatibility of the
display in the edit window, please download and use
the most recent version of the editor.
You can download the most recent versions of the
editor, plug-in editor, and Korg USB-MIDI driver from
the following website.
editor, plug-in editor, and Korg USB-MIDI driver from
the following website.
Korg website: “http://www.korg.com/”
Initialization
If operation of the M50 should become unstable, you
can initialize it.
can initialize it.
Turn off the power, and then, while holding down the
RESET CONTROLS switch and REALTIME
CONTROL switch, turn the power on.
RESET CONTROLS switch and REALTIME
CONTROL switch, turn the power on.
The M50 will be initialized. While the data is being
loaded, the display will indicate “Now writing into
internal memory.”
loaded, the display will indicate “Now writing into
internal memory.”
When initialization is completed, you’ll need to load
the preload data. Go to Global mode, and execute the
menu command Load Preload/Demo Data to load the
data. (See PG p.251)
the preload data. Go to Global mode, and execute the
menu command Load Preload/Demo Data to load the
data. (See PG p.251)