Zhone 1740 shdsl Manual Do Utilizador
1740 SHDSL 2/4-Wire Router User’s Guide
3.2.4 PPPoA
When a VC is configured for PPPoA, the router will auto-detect the Authentication code (PAP or CHAP),
and the NAPT function will be enabled automatically.
and the NAPT function will be enabled automatically.
STEP 1: Click WAN Setup on the Basic menu bar.
STEP 2: Enter values for the following fields: VPI, VCI, Encapsulation (LLC or VC MUX), Enable NAPT.
VPI
Enter a value for the vitual path identifier
VCI
Enter a value for the virtual channel identifier
LLC Encapsulation:
With LLC encapsulation, a link control header is added to the
Ethernet packet that identifies the protocol type (Ethernet). This
allows multiple protocols to be transmitted over the ATM Virtual
Circuit.
Ethernet packet that identifies the protocol type (Ethernet). This
allows multiple protocols to be transmitted over the ATM Virtual
Circuit.
VC Multiplexing:
With VC Multiplexing, no link control header is needed as the
ATM Virtual Circuit is assumed to be carrying a single protocol.
ATM Virtual Circuit is assumed to be carrying a single protocol.
Enable NAPT
Selecting Enabling NAPT will enable Network Port Address
Translation on the WAN interface.
Translation on the WAN interface.
Keepalive Interval(sec):
Keep-alive is a networking operation that periodically checks
the availability of a PPPoE/PPPoA connection between the CO
and CPE. If the keep-alive message is not acknowledged, the
connection will be interrupted.
the availability of a PPPoE/PPPoA connection between the CO
and CPE. If the keep-alive message is not acknowledged, the
connection will be interrupted.
STEP 3: Click PPPoA, and type the user name and password that the remote subscriber needs for
Internet access.
STEP 4: Click on the Add button. The new VC is added in the Current ATM PVC List on the bottom
screen.
24 July 2004 1740-A2-GB20-00