Zhone 2000 Manual Do Utilizador

- 102 -

1. Type P on the Router Configuration menu to select Configure RIP 

Poisoned Reverse by Port.

2. The IAD displays the interfaces on this IAD (sample shown):

Available Interfaces:

1. SDSL
2. 10/100BaseT Ethernet
0. (Abort)

Type the number of the port to enable or disable.

3. The IAD displays the RIP status of this port and a prompt:

RIP Poisoned Reverse for Slot 1, Port 1 is currently 
DISABLED

Enter E to Enable, D to Disable:

Type E to enable RIP Poisoned Reverse, or type D to disable it.

4. The IAD saves the configuration, and displays the Router 

Configuration menu.

5. Repeat these steps for each port for which you want to enable RIP 

poisoned reverse.

6. Continue with other configuration tasks, or press Escape to return to 

the Main menu.

7. Reset the IAD (page

) when you finish router configuration.

To set the RIP version:

1. Type V on the Router Configuration menu to select Configure RIP 

Version by Port.

2. If more than one WAN port is installed or more than one PVC/DLCI 

exists, the IAD displays the interfaces on this IAD (sample shown):
Available Interfaces:

1. SDSL
2. 10/100BaseT Ethernet
0. (Abort)

Type the interface number to set.

3. The IAD displays the port table for this interface and prompts for a port:

Port VPI VCI Encapsulation Type

PCR

Service

1

0

40 RFC 1483 (with LLC Encap)3641

UBR

Total = 3641 cps

Maximum PCR this interface can support = 3622 cps

Select Port: [1-8]

Type the port to set and press Enter.

4. The IAD displays the RIP configuration and status of the slot and port 

you’re setting, and prompts for a new version:
Current RIP configuration for Slot 1, Port 1 is 
Disabled
Enter RIP Version for Port 1

0. Disabled
1. Version 1 Broadcast
2. Version 2 Broadcast
3. Version 2 Multicast

Type the option number of the version to set.