Zhone 2000 Manual Do Utilizador

- 132 -

To set SLIC control mode (for POTS only), type T to display the SLIC 
Control Mode Selection menu:

Type the option of the control mode to set.

1. The IAD saves the mode you’ve selected and displays the menu.
2. Press Escape to return to the Voice Configuration menu and continue 

with other voice path configuration.

3. Reset the IAD (page

) when you finish voice path configuration. 

To set Compander Mode, type U to display the Compander Mode 
Selection menu:

1. Type the option of the Compander mode to set.
2. The IAD saves the mode you’ve selected and displays the menu.
3. Press Escape to return to the Voice Configuration menu and continue 

with other voice path configuration.

4. Reset the IAD (page

) when you finish voice path configuration. 

*******************************************

SLIC Control Mode Selection

*******************************************

Current Control Mode = AUTO Control Mode

A. AUTO Control Mode
B. MANUAL Control Mode

 

Voice gateway applications, such as CopperCom or 
JetStream, overrides the value set by this command.

*******************************************

Compander Mode Selection

*******************************************

Current Compander Mode = u-Law

U. u-Law Mode
A. A-Law Mode

 

If you are unsure which mode to use, check with your 
telephone service provider. Normally, u-Law is used in North 
America and a-Law is used in Europe.