Zhone 2000 Manual Do Utilizador

- 141 -

1. Type 1 to enable or disable the admin state for all ports.
2. The IAD displays this prompt:

Enter E to Enable, D to Disable:

Type E to enable the admin state, or D to disable it.

3. The IAD saves the mode you’ve selected and displays the menu.
4. Press Escape to return to the Port Administration menu and continue 

with other voice path configuration.

5. Reset the IAD (page

) when you finish voice path configuration.

Type 2 to display the current admin state by port number. 

The IAD displays the following report:

1

DISABLED

2

ENABLED

3

DISABLED

4

DISABLED

Press any key to return to the Port Administration menu.

1. Type 3 to enable or disable the admin state for a specific port. The IAD 

displays the port prompt:
Select Line: [1-8]

Type the port number to set.

2. The IAD displays the following prompt:

Enter E to Enable, D to Disable:

Type E to enable the admin state, or D to disable it.

3. The IAD saves the mode you’ve selected and displays the menu.
4. Press Escape to return to the Port Administration menu and continue 

with other voice path configuration.

5. Reset the IAD (page

) when you finish voice path configuration.

Type 4 to reset the connection between the Voice Port phone and the 
MGCP voice gateway. 

You use this option if one side of the link incorrectly identifies a call as up 
and the other side thinks the call as down.

To reset the connection, type the number of the port and press Enter.

1. Type P to configure the packet size (default 5.5 ms). 
2. The IAD displays the following prompt:

Enter packet size in ms [5.5]>

Type the packet size value and press Enter.

3. The IAD saves the new packet size and displays the menu.
4. Press Escape to return to the MGCP menu and continue with other 

voice path configuration.

5. Reset the IAD (page

) when you finish voice path configuration.