Zhone 2000 Manual Do Utilizador

- 12 -

9. Press any key, and repeat the log in sequence. If you cannot log in, call 

your support provider for assistance.

When you first log in, the IAD displays the Main menu. The menu may 
vary, depending on the IAD.

Before you configure the Ethernet IP address, you should know the IP 
address and subnet mask that is to be assigned to this port. It may be 
displayed on the work order, or you may obtain or determine the 
appropriate IP address by consulting with the network administrator.

The IAD is shipped with a null IP address and subnet mask. To configure a 
port IP address:

1. On the Main menu, type 2 to select Configure IP Router. 
2. The IAD displays the Router Configuration menu.

*****************************************

 Main Menu 

*****************************************

1. Reports Menu
2. Configure IP Router
3. Configure Bridge
5. Configure WAN
6. Configure LAN
7. Configure SNMP
8. Configure Login
9. System Utilities
D. Configure DHCP Server
M. Configure Multicast
N. Configure NAT
T. Telephony Clock Recovery
Z. Diagnostics Menu
C. Command Line Interface
R. Reset System
P. Voice Path Configure
E | A | O. CopperCom Call Control

Options E, A and O 
vary, depending on the 
voice gateway selected 
in the Voice Path 
Configure command.