Zhone 5100 Guia Da Instalação

                                                                                                 

You can set the 5100/6100 VDR on a sturdy table top. Before installing a 5100/6100 VDR on any 

surface, verify that there is sufficient clearance for visual inspection as well as manipulating the 

cables on the rear panel and that the surface is sturdy enough to support the combined weight of 

the 5100/6100 VDR and all of the cables that you intend on connecting to it.

1. Clear a space for the unit.
2. Turn the 5100/6100 VDR over.
3. Attach the rubber feet to the bottom of the 5100/6100 VDR chassis.
4. Carefully turn the unit over.
5. Place the unit on the table or shelf near a power source.
6. Connect the network cables. See Chapter 3 “Port connections” on page 19.
7. Secure the captive grounding nut to a protective earthing terminal which has a permanent 

connection to building earth. 

8. To power on the 5100/6100 VDR, see “Connecting to a PC and powering the VDR” on 

Warning. You must not stack these devices one upon another.

You have successfully installed a 5100/6100 VDR to a table top.

WARNING