Zhone 5100 Guia Da Instalação
Setting up an initial configuration
Vpacket 5100/6100 Series Installer’s Guide
37
Example:
5. Issue commit ip to update the Flash memory.
6. Issue save to write the commands to the Flash memory.
7. Issue show ip and verify the changes.
6. Issue save to write the commands to the Flash memory.
7. Issue show ip and verify the changes.
Now, both Ethernet IP addresses are ACTIVE. You need to delete the manufaturer’s default
IP address (see “Deleting an IP address” on page 38).
IP address (see “Deleting an IP address” on page 38).
Example:
VPacket# show ip
ACTIVE indicates this is the current operational setting
CONFIG indicates this has been configured but not activated
-------------------------IP INTERFACE----------------------
INTERFACE NAME IP ADDRESS NET MASK
ACTIVE ethernet 192.168.0.254 255.255.255.0 Not NATed
CONFIG ethernet 10.10.10.254 255.255.255.0 Not NATed
CONFIG wan 1.1.1.1 255.255.255.0
CONFIG Default Gateway 1.1.1.254
ACTIVE Voice Ip Address 1.1.1.1
-----------------------------------------------------------
VPacket#
VPacket# show ip
ACTIVE indicates this is the current operational setting
CONFIG indicates this has been configured but not activated
-------------------------IP INTERFACE----------------------
INTERFACE NAME IP ADDRESS NET MASK
ACTIVE ethernet 192.168.0.254 255.255.255.0 Not NATed
ACTIVE ethernet 10.10.10.254 255.255.255.0 Not NATed
CONFIG wan 1.1.1.1 255.255.255.0
CONFIG Default Gateway 1.1.1.254
ACTIVE Voice Ip Address 1.1.1.1
-----------------------------------------------------------
VPacket#