Zhone 6210 Guia Do Utilizador
3. Using the Web Interface
6210-A2-GB23-00
January 2005
3-35
Modem Test
The Modem Test is used to check whether your modem is properly connected to
the WAN Network by running OAM F4 and F5 end-to-end and segment tests. The
test may take a few seconds to complete. To perform the test, select your
connection from the list, select a Test Type, and click on the Test button.
the WAN Network by running OAM F4 and F5 end-to-end and segment tests. The
test may take a few seconds to complete. To perform the test, select your
connection from the list, select a Test Type, and click on the Test button.
Before running this test, make sure you have a valid DSL link; if the DSL link is not
connected, this test will always fail. Also, the DSLAM must support this feature.
Not all DSLAMs have OAM F4 and F5 support.
connected, this test will always fail. Also, the DSLAM must support this feature.
Not all DSLAMs have OAM F4 and F5 support.
Figure 3-28. Modem Test