Zhone 1813 Guia Do Utilizador

This option defines the fastest rate a user can send cells to the network. It is expressed in units of 
cells 

per second. 

-avg <value> 

This option defines the maximum sustainable/average rate a user can send cells to the network. It 
is expressed in cells per second. This specifies the bandwidth utilization. This value must always 
be less than or equal to the Peak Cell Rate (see -pcr option). 

-mbs <value> 

Maximum number of cells the user can send at the peak rate in a burst, within the sustainable 
rate. 

-cdvt <value> 

This option constrains the number of cells the user can send to the network at the maximum line 
rate. It is expressed in microseconds. 

 

EXAMPLE 

The vcadd command creates a PVC (vpi - 0,vci - 38). Service class is cbr (Constant Bit Rate) 
and encapsulation as aal2 (for voice). The traffic descriptors are set for peak cell rate of 
1600kbps, burst size of 25 cells and cell delay variation of 50000 microseconds. 

 

This command allows to add and configure VP level atm connection 

 

COMMAND DESCRIPTION 

<id> 

Connection identification 

<vpi> 

vpi number 

< service> 

cbr / rtvbr / nrtvbr / ubr 

<service> 

cbr / rtvbr / nrtvbr / ubr 

<peak val>