Zhone 1813 Guia Do Utilizador

3.  At the atm prompt, type home or exit to return to the home prompt.  

 

1.  Return to the home prompt. 

2.  Type sndcp to enter the sndcp prompt.  

3.  Type routedbridge atm0 enable 0 35 -o -enc LLC. In this case, atm0 is used. You can 

choose other atm interface if you wish. In addition, in the command, LLC must be 
capitalized. 

4.  If the sndcp prompt pops up, a PVC 0/35 is successfully created for RFC 1483 Routed mode.  

 

1. Return to the home prompt and type the following command.  

 

 

If you need the usage of the ifconfig command, type ifconfig. 

 

 

2. If the Ethernet IP address is successfully set up, the home prompt pops up. 

 

To delete the PVC set up for the RFC 1483 Routed, you must disable the service first under the 
sndcp directory. Secondly, delete the VC under the atm directory. The following screen is an 
example. 

 

 

31