Zhone 6301 Guia Do Utilizador
A. Command Line Interface
6300-A2-GB20-00
March 2002
A-17
IP Packet Processing Commands
Table A-12. IP Packet Processing Commands
IP multicast
{
enable
|
disable
}
Minimum Access Level: Administrator
Command Mode: Config
Command Mode: Config
Enables or disables the forwarding of IP multicast packets. This setting is retained across
power cycles.
power cycles.
enable – Enable forwarding of IP multicast packets.
disable – Disable forwarding of IP multicast packets. This is the default setting.
IP routing
{
enable
|
disable
}
Minimum Access Level: Administrator
Command Mode: Config
Command Mode: Config
Enables or disables routing capability for traffic in the service domain so the device
operates as a router (gateway) or a bridge.
operates as a router (gateway) or a bridge.
NOTE: IP routing of traffic in the management domain is unaffected by this command;
IP routing is always enabled for management domain traffic.
IP routing is always enabled for management domain traffic.
enable – Enable IP routing for traffic in the service domain; the router operates as a
gateway. If upgrading software to R3, the default is enable so the router’s current
functionality is retained.
gateway. If upgrading software to R3, the default is enable so the router’s current
functionality is retained.
disable – Disable IP routing for traffic in the service domain. This is the default setting.
packet processing
{
enable
|
disable
}
Minimum Access Level: Administrator
Command Mode: Config
Command Mode: Config
Enables or disables the processing of all service domain packets, including IP packets.
This setting is retained across power cycles.
This setting is retained across power cycles.
enable – Enable processing of packets. This is the default setting.
disable – Disable processing of packets.