Zhone 6300 Manual Do Utilizador

2. Accessing the DSL Router

6300-A2-GB20-10

November 2003

2-5

3. To create a login ID and password for a specified access level, enter:

telnet name create

level login ID password

Example: Type telnet name create operator 238clrd3 1234
and press Enter.

NOTE:

Step 7

on page 2-3

for list of invalid characters.

4. Enable Telnet login so that the ReachDSL Router will perform login and

password validation for the Telnet session connection. Enter:

telnet login enable

save

NOTE:

Any input during an Administrator configuration session must be saved
while still in configuration mode.

Determining the Current Access Level

The command line prompt displays the access level. The factory default for
System identity is CUSTOMER>. You can set your own system identity name to
replace CUSTOMER. See the examples below.

Determining the Available Commands

To determine the commands available at the current login access level, enter any
of the following:

help

? (question mark)

the command, without any parameters

If the prompt format
appears as . . .

Or, if a System identity of
PARADYNE is entered, the
prompt displays . . .

Then the DSL router
access level is . . .

CUSTOMER>

PARADYNE>

Operator, display mode

CUSTOMER #>

PARADYNE #>

Administrator, display
mode

CUSTOMER – CONFIG#> PARADYNE – CONFIG#>

Administrator,
configuration mode