Zhone 6300 Manual Do Utilizador

4. DSL Router Configuration Examples

— Configuration examples included in this chapter cover some common 

configurations, providing only a few of the possible scenarios.

— IP addresses used in the examples are for illustrative purposes only; they 

are not intended to be used when configuring your local network.

— Adding static routes to the core router is typically necessary when routing 

is enabled.

— Bridging-only mode is the default configuration.

This is the factory default configuration. To return the DSL router to the factory 
default configuration, use the following command: configure factory.

— When the DSL router is configured for bridging, DSL link encapsulation for 

the DSL port must be configured for EtherHDLC at the line card.

— This configuration is only supported with firmware version 4.2.5 or higher.

01-16966

DSL

Router

Hub

155.1.3.2

155.1.3.3

155.1.3.4

IP, IPX,

Apple Talk, etc.,

End-user

Systems

Console
Port
Connection

Ethernet

DSL

Core

Router

WAN

155.1.3.1

155.1.3.5