Zhone 6301 Instrução De Instalação

3. Locate the DSL pair of T1/R1 connectors on the customer premises side of the

NID or punchdown block. Attach the wiring that will be connected to the DSL jack.

The Hotwire 6301 or 6302 IDSL Router connects to the local loop via wiring from the
demarcation point to an RJ11 wall jack. The DSL twisted-pair wiring from the local loop
terminates at a new or existing wall jack. It may be necessary to install a standard
single RJ11 jack or replace a single jack with a double RJ11 jack.

99-16589

DSL

RJ11

Jack

Central

Office

Punchdown

Block or NID

Customer Premises

DSL

Local Loop

Demarcation Point

DSL

Twisted-pair

Wiring

DSL

Router

"

1. Wiring can be run from the punchdown block or NID to a new or existing wall jack.

Match the pair colors on both ends.

2. Label the DSL jack.

3. Reconnect the DSL access pair at the punchdown block or NID. Tighten both

terminal screws with a flat-blade screwdriver.

The RJ11 6-pin jack uses the center two pins. For pin assignments, refer to Cables &
Connectors on page 12.