Zhone 6301 Instrução De Instalação
3
Network Overview with a Hotwire 6342 SDSL Router
99-16639
Punchdown
Block or NID
DSL
Jack
6342
SDSL
Router
Customer Premises (CP)
DSL
Ethernet
Crossover
Cable
Ethernet Straight
Through Cables
Central
Office
(CO)
Demarcation
Point
Local Loop
Hub
End-user
Systems
DSL – Digital Subscriber Line
New Wiring Connections
NID – Network Interface Device
Service
Provider
NOTE:
For Ethernet cabling details, refer to Installing the Hotwire 6341/6342 SDSL Router
on page 7.
on page 7.
Package Checklist
Verify that your package contains the following:
-
Model 6341 or Model 6342 SDSL Router
-
DSL interface cable with RJ11 modular plugs
-
Power cord with power transformer
Wiring and Cables Needed
You will need the following wiring and standard connectors with this product:
-
Standard RJ11 wall jack for the DSL cabling.
-
DSL cabling: New or existing unshielded twisted-pair wiring (CAT3 or better). The
CAT3 wiring must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or
26 AWG (.4 mm).
CAT3 wiring must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or
26 AWG (.4 mm).
-
Ethernet cabling: New or existing shielded twisted-pair wiring (CAT5 or better). The
CAT5 wiring must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or
26 AWG (.4 mm). A straight-through or crossover Ethernet cable is used.
CAT5 wiring must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or
26 AWG (.4 mm). A straight-through or crossover Ethernet cable is used.
Refer to Installing the Hotwire 6341/6342 SDSL Router on page 7 for cabling details.