Zhone 6381-a4-200 Guia Do Utilizador
6381-A4 Router Users Guide
52
LAN Setup
On one side of your modem, you have your own Local Area network (LAN) connections. This is
where you plug in your local computers to the modem. The modem is normally configured to
automatically provide all PCs on your network with Internet addresses.
where you plug in your local computers to the modem. The modem is normally configured to
automatically provide all PCs on your network with Internet addresses.
The RG provides LAN configuration for multiple LAN bridge groups. Up to five LAN bridge groups
are supported. The LAN interfaces could include: Ethernet, USB, and Bridge. It is possible to
assign any LAN interface to any bridge group but only one group, except that the Ethernet
interface needs to stay in LAN group 1. Each LAN group can then be configured with static IP
address, dynamic IP address, or be unmanaged (no IP).
are supported. The LAN interfaces could include: Ethernet, USB, and Bridge. It is possible to
assign any LAN interface to any bridge group but only one group, except that the Ethernet
interface needs to stay in LAN group 1. Each LAN group can then be configured with static IP
address, dynamic IP address, or be unmanaged (no IP).
LAN Configuration
By default, both the Ethernet port and USB port are in LAN Group 1. The USB port may be
removed from LAN Group 1 and added to LAN Group 2 for configuring separately.
removed from LAN Group 1 and added to LAN Group 2 for configuring separately.
You can configure the USB interface and WLAN interfaces to a different LAN group; however, the
Ethernet interface is default in LAN group 1 and cannot be moved.
Ethernet interface is default in LAN group 1 and cannot be moved.
The LAN Group Configuration page allows you to configure settings for each defined LAN group.
You can also view the status of advanced services that can be applied to this LAN group. A green
status indicates that the services have been enabled, while a red status indicates that the service
is currently disabled.
status indicates that the services have been enabled, while a red status indicates that the service
is currently disabled.