Zhone 7995 Guia Do Utilizador
1. About the TDM SHDSL Endpoint
1-6
September 2004
7990-A2-GB20-20
SNMP Management Capabilities
Hotwire Model 7995/7996 endpoints support SNMP Version 1, and can be
managed by any industry-standard SNMP manager and accessed by external
SNMP managers using SNMP.
managed by any industry-standard SNMP manager and accessed by external
SNMP managers using SNMP.
Management Information Base (MIB) Support
For a detailed description of the supported MIBs, visit Paradyne’s Web site at
www.paradyne.com. Select Technical Support
www.paradyne.com. Select Technical Support
→ Online Support →
.
The following MIBs are supported:
MIB II (RFC 1213 and RFC 2863 (was 1573)) – Defines the general objects
for use with a network management protocol in TCP/IP internets and provides
general information about the unit. MIB II is backward-compatible with MIB I.
for use with a network management protocol in TCP/IP internets and provides
general information about the unit. MIB II is backward-compatible with MIB I.
Entity MIB (RFC 2037) – Supports all DSLAM cards.
DS1/E1/DS2/E2 MIB (RFC 2495 (was 1406)) – Reports the performance
status of the interface and supports the features found on the Performance
Statistics screen.
status of the interface and supports the features found on the Performance
Statistics screen.
RS-232-Like MIB (RFC 1659) – Defines objects for managing RS-232-type
interfaces (e.g., V.35, RS-422, RS-423, etc.) and supports the synchronous
data port on the DSU.
interfaces (e.g., V.35, RS-422, RS-423, etc.) and supports the synchronous
data port on the DSU.
Paradyne Enterprise MIB – Supports configuration, status, statistics, and
tests.
tests.
SHDSL MIB (draft-ietf-adslmib-hdsl2.txt) – Supports SHDSL.