Zhone 7995 Guia Do Utilizador

You can communicate with the Hotwire TDM SHDSL endpoint with an 
asynchronous terminal interface (ATI) using one of the following methods:

„

Direct connection through the COM port of the endpoint or through the serial 
port of the DSLAM management card.

„

Telnet session through the Embedded Operations Channel (EOC).

Only one terminal interface session can be active at a time, and another user’s 
session cannot be forced to end. 

Security can limit ATI access several ways. To limit user access or set up login IDs, 
refer to 

.

Ensure that the device you connect communicates using these settings:

„

Data rate set to 9.6 kbps

„

Character length set to 8

„

Parity set to None

„

Stop Bits set to 1