Zhone 7995 Instrução De Instalação
13
CRC Trap Threshold
Possible Settings: 1–900, or 0 to Disable
Default Setting: 0
Default Setting: 0
Specifies the threshold for CRC events in a 15-minute interval after which a trap will be
sent.
sent.
Attenuation Trap Threshold
Possible Settings: 1–127 dB, or 0 to Disable
Default Setting: 4
Default Setting: 4
Specifies the threshold for loop attenuation in a 15-minute interval after which a trap
will be sent.
will be sent.
Margin Trap Threshold
Possible Settings: 1–15 dB, or 0 to Disable
Default Setting: 4
Default Setting: 4
Specifies the threshold for the Signal-to-Noise ratio margin in a 15-minute interval
after which a trap will be sent.
after which a trap will be sent.
Table 3. Synchronous Data Port Options – Model 7995 (1 of 3)
Port Type
Possible Settings: E530A, V.35, RS449, X.21
Default Setting: E530A
Default Setting: E530A
Determines the port type for the data port.
Payload Rate
Possible Settings: 64 – 2048 Kbps in 64k increments
Default Setting: 192 Kbps
Default Setting: 192 Kbps
Specifies the payload rate of the port. This option is not displayed on the unit when
Adaptive Rate is enabled. The STU-C configures the payload rate for the STU-R when
Adaptive Rate is disabled (Max DSL Rate = Min DSL Rate, see
Adaptive Rate is enabled. The STU-C configures the payload rate for the STU-R when
Adaptive Rate is disabled (Max DSL Rate = Min DSL Rate, see
Table 2. DSL Port Threshold Trap Options (2 of 2)