Zhone 7995 Guia Do Utilizador
3. Initial Startup and Configuration
3-6
May 2002
7990-A2-GB20-00
Procedure
To change Identity information:
1. Position the cursor in the System Name field. Enter a name unique in your
network to identify the SNMP managed node (or unit).
2. Position the cursor in the System Location field. Enter the physical location of
the unit.
3. Position the cursor in the System Contact field. Enter the name and contact
information of the person responsible for the unit.
4. Press Ctrl-a to switch to the function key and message area below the dotted
line.
5. Select Save and press Enter.
See
to
view this information once you have entered it.
Choosing a Configuration Method
You can make configuration changes through a VT100-compatible terminal using
the unit’s Configuration menus or by manually changing switches on the board.
the unit’s Configuration menus or by manually changing switches on the board.
The unit is shipped with the switchpacks disabled to allow settings to be made
through the Configuration menus. To use the switches, see
through the Configuration menus. To use the switches, see