Zhone 2004 Guia Do Utilizador

C o n f i g u r a t i o n

Type the option number of the protocol (usually TCP or UDP) to use. The 
IAD displays the menu with the new status message. 

Press Escape to continue. The IAD prompts you to enter the Translated Port 
number:

Type the translated port number (range = 1-65535) and press Enter. The 
IAD prompts you to enter the Local Server Standard Port number:

Type the Standard Port Number (range = 1-65535) and press Enter. If you 
did not choose TCP and UDP for protocol, the IAD displays the following 
message:

If you chose TCP and UDP for protocol, the IAD prompts you to enter the 
number of consecutive ports to use.

Type the number of consecutive ports to use and press Enter. The IAD 
displays a port report, saves the NAT configuration, and displays the NAT 
Configuration menu. 

Continue with other NAT configuration tasks, or press Escape to return to 
the Main menu.

Each NAT alias entry allows a device on the LAN (inside of NAT) to be 
accessible from the Internet via a unique IP address. The IAD only translates 
IP addresses for alias entries—port numbers are not changed.

You can create up to seven direct public-to-private IP address mappings via 
the NAT alias table.

First, assign each public IP address using option C 

− Configure Port IP 

Address on the Router Configuration menu (Figure 4.16) 

− to entries 1 

through 7 on the PVC with a 255.255.255.255 subnet mask. Next, make alias 
entries to map each local IP address to a corresponding public IP address.

These NAT alias entries allow IP traffic to the public IP address to pass 
directly through, port for port, to the corresponding private IP address.

To configure each NAT alias entry, follow the steps below.