Zhone 2208 Guia Do Utilizador
R e p o r t s
5-13
To permanently reset statistics for a specific protocol, type the option. The
IAD immediately resets all statistics for the specified protocol, and displays
the menu.
Continue resetting network statistics, or press Escape to return to the Network
Statistics menu.
IAD immediately resets all statistics for the specified protocol, and displays
the menu.
Continue resetting network statistics, or press Escape to return to the Network
Statistics menu.
Interface Statistics Reports
Type “I” on the Reports menu to display the Interface Statistics menu. This
menu contains commands to display information about the packets handled
between layer 2 and layer 3 on a per-port basis, and to clear statistics for
specific protocols.
To display specific interface statistics, follow the steps below.
between layer 2 and layer 3 on a per-port basis, and to clear statistics for
specific protocols.
To display specific interface statistics, follow the steps below.
1
Select an interface and optionally a port. The IAD then displays the report.
The IAD displays the interfaces from which you may choose on this IAD.
2
Select the interface. The IAD displays the port table and prompts you to
select a port.
3
Type the port number and press Enter. The IAD displays the Interface
Statistics menu:
NOTICE:
The commands that display on the Interface Statistics menu vary, based
on the WAN module and configuration of the IAD.
on the WAN module and configuration of the IAD.