Zhone 2208 Guia Do Utilizador
C o n f i g u r a t i o n
4-9
To use one of the predefined configurations, follow the steps below.
1
On the WAN Configuration Menu (Figure 4.4), type “5” to display the
Quick Configuration menu.
Figure 4.8
Quick Configuration Menu
2
Type the option corresponding to the DSLAM to which the 2304 or 2308 is
connected. The IAD automatically resets.
3
To continue configuration, log back onto the IAD.
Configure Physical Interface
− T1/E1 Interface (2208
Only)
The tasks described in this section all begin on the T1 or E1 Configuration
menu. The tasks are described in order. Review and update each of the
options as necessary, and reset the IAD when you finish WAN configuration.
Type “2” on the WAN Configuration menu (Figure 4.4) to display the T1
menu. The tasks are described in order. Review and update each of the
options as necessary, and reset the IAD when you finish WAN configuration.
Type “2” on the WAN Configuration menu (Figure 4.4) to display the T1
Configuration menu (Figure 4.9).