Zhone 2208 Guia Do Utilizador

the PCR to the maximum rate for the current line speed. The IAD saves the 
configuration and displays the ATM PVC Configuration menu.

AAL2/LES Type “9” on the ATM Encapsulation Configuration menu (Figure 4.24) to 

display the AAL2 Audio Profile Format menu.

To select ITU, type “1”. The IAD displays the AAL2 Audio Profile menu 

with available options. Type “2” for ATM Forum.

The IAD displays the Peak Cell Rate (PCR) Configuration menu (Figure 
4.26).

Type the PCR value or press Enter to set the PCR to the maximum rate for 

the current line speed. The IAD saves the configuration and displays the 

ATM PVC Configuration menu.

Type “A” for RFC 2516 (PPoE with LLC) or “B” for RFC 2516 (PPoE 

with VC mux.

To delete a PVC, follow the steps below.

Type “3” on the ATM PVC Configuration menu (Figure 4.23) to select 

Delete PVC. The IAD displays the port list and a prompt.

Type the port number to delete and press Enter.

To delete the PVC, type “Y”, or cancel the deletion by typing any other 

character. The IAD saves the configuration and displays the PVC 

Configuration menu where you may continue with other PVC management 

tasks.

Show Current PVCs
1

To display a list of current PVCs, type “4” on the ATM PVC 

Configuration menu (Figure 4.23) to display the port table with associated 

PVCs:

When you have finished viewing the list, press any key to return to the 

ATM PVC Configuration menu.

To configure ATM options, type “4” on the WAN Configuration menu 

(ATM) to display the ATM Configuration menu (Figure 4.29). Current 
datalink protocol on the WAN Configuration menu must be set to ATM to see