Zenith vcp354 Guia De Utilização

P A G E   3

These simple precautions will help ensure that you get many years of safe enjoyment from your new product.

Read Instructions
Read all of the safety and operating instructions
before operating the product.

Retain Instructions
Keep all safety and operating instructions for
future reference.

Heed Warnings
Follow warnings on the product and in the 
operating guide.

Follow Instructions
Follow all operating and use instructions.

Cleaning
Unplug this product from the wall outlet before 
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.

Attachments
Do not use attachments not recommended by
product manufacturer as they may cause 
hazards.

Water and Moisture
Do not use this product near water—for 
example, near a bathtub, wash bowl, sink, or
laundry tub, in a wet basement, or near a 
swimming pool.

Accessories
Do not place product on an unstable cart, stand, 
tripod, bracket, or table. Product may fall, 
causing serious injury to a child or adult, and
serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table 
recommended by the manufacturer or sold with
the product. Any mounting of product should
follow manufacturer’s instructions and should
use a mounting accessory recommended by 
manufacturer.

Transporting Product
Move product and cart 
combinations with care. Quick
stops, excessive force, and
uneven surfaces may cause 
product and cart combination
to overturn.

Slots and openings in cabinet must not be
blocked or covered. They are provided for 
ventilation, to ensure reliable operation, and to
protect from overheating. Never block openings
by placing product on a bed, sofa, rug, or other
similar surface. Do not place product in built-in
installation such as a bookcase or rack unless
proper ventilation is provided or manufacturer’s
instructions have been adhered to.

Operate product only from
type of power source 
indicated on marking label.
If you are not sure of the
type of power supply to your
home, consult your product
dealer or local power 
company. For products intended to operate from
battery power or other sources, refer to manual.

Product is equipped with a polarized 
alternating-current line plug (a plug having one
blade wider than the other). As a safety feature,
this plug will fit into power outlet only one 
way. If you’re unable to insert plug fully into
outlet, try reversing the plug. If plug still fails
to fit, contact an electrician to replace your
obsolete outlet. Do not defeat safety purpose of 
polarized plug.

Route power-supply cords so they are not likely
to be walked on or pinched by items placed
upon or against them, paying particular 
attention to cords at plugs, convenience 
receptacles, and the point where they exit from
product.

If an outside antenna or cable system is 
connected to this product, be sure antenna or
cable system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National
Electrical Code (USA), ANSI/NFPA 70 provides
information on grounding of mast and 
supporting structure, grounding of lead-in wire
to an antenna discharge unit connection to
grounding electrodes, and requirements for
grounding electrode. 
( See Fig. 1 below. )

Antenna Lead-in Wire

Antenna Discharge Unit
NEC Section 810-20 

Grounding Conductors
NEC Section 810-21

Ground Clamps

Power Service Grounding 
Electrode System 
NEC Art 250, Part H

Ground

Clamp

Electric Service

Equipment

Antenna grounding per NEC Code, ANSI/NFPA 70