Zoombak zmbk200 Instrução De Instalação

No visible LED status

Power On Device per section 3.2.

Blinking LED

Connect Device to Constant power source 
when ignition key is removed.  Ensure the 
red wire is connected to 12VDC power 
source.  With a meter verify there is 12 volts 
on the red wire.  Ensure the USB cable is 
plugged into ZB100 device.  Device LED 
will have Solid Amber or Green light when 
proper power source has been installed.

Unable to acquire 
GPS fix through Web 
Portal

Move the vehicle to new location that does 
not have obstacles directly overhead.

Unable to acquire 
GPS fix through Web 
Portal

Aftermarket window tinting may affect 
reception of GPS signals.  Move the device 
to new mounting location.

zoombak.com